I love my job!

 I have previously blogged about this ring. I have known the owner since she was about 5 years old.

She brought it into me to see if I could repair it.

This pieces needed a little more than repairing.
It needed to be restored.  The word restore makes my heart race with great delight and my eyes glaze over with the anticipation of a great challenge.

I had included this ring in a previous blog, so check it out to find the back story on it. :o)

I have spent several work hours with this ring. In addition to the repair and restoration, she wanted it sized to fit her also.

I hope that she will enjoy it for many more years to
come!

God Bless you Kayleen and your marriage!

I hope you love it! It is a beautiful ring!

I love love love my job!

My Donations!

 Each year the Sulphur Springs Symphony League has an auction in the fall of the year. It is an event that I have looked forward to for at least the last 14 years. Our little town is blessed to have them as part of who we are. They are such a large part of our Fourth of July Celebration each year on our town square. They are a partially hidden support for our students who play the stringed instruments in our local schools. I say partially, because they do not stand up and shout out what they do to benefit the students. They are like WD-40 on a squeaky door. It causes things to run so much more smoothly without even being noticed. As a parent whose children have benefited from the Symphony League, my heart is grateful. I hope to always participate in donating something special for their cause. This year I wanted to hand craft a couple of pieces that played back on the symphony theme.

For the first piece I went into one of my secret hiding places and pulled out one of my favorite things that we made in Metal Arts class at school. A piece of Mokume-Gane. Mokume translates from Japanese as "wood eye" referring to burl wood grain and gane means "metal".  Looking at the pick you can see where the name comes from.

 It took over six weeks to make this metal. We started out with 13 pieces of surgically cleaned metal. By stacking them and heating them to an extremely high heat for long hours we were able to begin the process of making this Japanese metal form, Once it reached it's inital forming temperature, we pulled it out of the kiln and used sledge hammers to pound it as flat as possible. Then we reannealed it and pounded it again. We repeated this process again and again and again. Needless to say, this was  s-l-o-w tedious work. The metal was finally 1/3 of the oringal stacked thickness. We drilled holes and graved trenches into the metal to make the pattern. Once the patterns were cut into the metal, we continued to flatten the metal by use of the rolling mill. After two passes through the mill, we had to anneal it once again. It went through the rolling mill at least 250 times that I know of.  


I do not have a lot of this metal, but I wanted to make something that would be useful and different. Sooooo I made a guitar pick with it. The odd angels on the pictures are caused by the texture I put on the finished pick so that it would not be slippery. This piece of metal is formed from sterling silver, fine silver and copper. 

The second piece is made of sterling silver. I got the idea to make this from seeing a few pieces that are similar to this. I call it "The Heart of Music". I don't really know how original that is, but I felt it needed a title.

I hand crafted the two pieces by bending sterling silver square wire. I wanted it to have a sturdy structure, that would hold the design. 

I always hesitate to post the ugly pictures. You know the ones that are not of the finished product. I hope it doesn't scare anyone off from my shoppe.  This picture was taken right after I dunked them in the boric acid for soldering purposes.

 I soldered them together and added the baille.  I used my chasing hammer to put a "hammered" finish on the pendant. It is just enough to make you want to look at it a little closer and to reflect on it a little longer.

 I had the chain in my shoppe. I chose it as it was simple and would not take away from the statement the pendant was to make.

Though these two pieces are fairly simple, I did put my heart into them and hope that whoever wins them in the auction will treasure them.

Kudos to Sulphur Springs Symphony League! Keep up the great work you are doing in our town. You make a difference for us all!

Hand Crafated 14K Baby Ring

A grandfather requested this ring be hand crafted for his highly anticipated grandaughter.

I do not know names, but I do know the importance of grandbabies and the joy they bring when they arrive. I am so delighted to be in on this little suprise.

 

This is an almost step by step look at how it was made. 

1) Measure out the metal. The ring was to be a size 3. 

 2) I wanted to put a texture on it that would last without showing great wear in the future. The completed ring fit my pinky finger. Hopefully she will be able to wear this her whole life and smile at the memories that will come with it over the years.

3) Once the hammering is done, the metal is a bit out of shape.

 Thank God for Parallel Pliers. They straighten the metal so nicely.

4)The hammering stretches the metal slightly, so it has to be remeasured.

5) Once I cut the metal to approximately the right size, I began to bend the metal into a semi round state.

Remember, I did say semi-round.




6) You manipulate the metal to meet perfectly for soldering puposes.

 














7) You coat the ring with boric acid to protect the metal from the fire. You also add flux to where you want the solder to flow to.

8) Once the ring is clean, you shape the ring in to a round shape. You do this by placing the ring on a  mandrel and and hitting it  with a leather mallet on all sides.

Nice and round!

9) Emery both sides of the ring to get any major scratches off that were made during the fabrication process.

10) Once it is shaped properly, and the first metal clean up is done, you hammer the ring where the solder joint is. The will normally strech the ring to the right size.

11) Tripoli will normally remove the remaining scratches on the ring.
 
12) Rouge makes the metal come alive! It dances with the light and shimmers only as true gold can.

Finished! Now it is ready to be shipped to the

Houston area immediately!

Congratulations on your wonderful gift of a precious grandchild!

Thank you for allowing me to make this to be treasured keepsake, that she will have her whole life. What an honor, you have given me.

How To Care For Your Gold Jewelry

Gold is lasting and durable, but it can get scratched or dented if treated roughly.

Gold's worst enemy is chlorine. Repeated exposure can weaken gold's structure, eventually leading to breakage. Keep your jewelry away from chlorinated cleaning products and out of the swimming pool and jacuzzi.

Protect your gold jewelry by storing it safely or keeping it wrapped in a soft cloth when not being worn.

Clean your gold jewelry with a cleaning solution of sudsy lukewarm water, or take it to a jeweler and have it professionally cleaned.

Dry and polish jewelry with a chamois or soft cloth after cleaning and rinsing.

Keep gold jewelry free from dust, moisture, perspiration and makeup.

Always inspect your gold jewelry for weakness or damage. If any is found, take it to a jeweler for immediate repair. (I will be glad to restore it for you.)

I made this sweet little bracelet Saturday evening after closing. It was made for a sweet little baby girl that has not made her appearance on planet earth just yet. Just a few more weeks and we will get to see her.

This is the first in a new line of children's jewelry I will be making for the shoppe. 

I wanted to add a chain to insure from accidental loss off of her wrist.

I also stamped her name on the front side of the bracelet.  Though the imperfections glare at me,
I am reminded what Mr. Waters told us time and time again in class," Imperfections are the guarantee mark of a hand crafted piece of jewelry."  So instead of trying to perfect it, I left it alone and am at peace with it, as she will always have the first piece of baby jewelry I made. Maybe one day it will be worth more than we could ever imagine now.

I wanted to make a keepsake for her, one that would grow with her. Looking at the bracelet, you would wonder how in the world will a bracelet that fits a baby grow with her. I will tell you, when you know a metalsmith, it is possible. When she out grows this size, I will just add additional metal to each end and rework the shape. I will at that time put her birth information on the inside of the bracelet. I hope her mother likes it. It was made with love and care. 

I have another piece of baby jewelry that I need to make. I will get it posted soon...well as soon as I get it made. Surely that won't take too long...right!?!?!?

The ABCs of Life

ACCEPT DIFFERENCES
BE KIND
COUNT YOUR BLESSINGS
DREAM
EXPRESS THANKS
FORGIVE
GIVE FREELY
HARM NO ONE
IMAGINE MORE
JETTISON ANGER
KEEP CONFIDENCES
LOVE TRULY
MASTER SOMETHING
NURTURE HOPE
OPEN YOUR MIND
PACK LIGHTLY
QUELL RUMORS
RECIPROCATE
SEEK WISDOM
TOUCH HEARTS
UNDERSTAND
VALUE TRUTH
WIN GRACIOUSLY
XEROSCAPE
YEARN FOR PEACE
ZEALOUSLY SUPPORT A WORTHY CAUSE

What am I working on now??

These are the two rings that I am currently restoring.

When I received the phone call asking me if I can
repair a ring that had been cut off of a finger, my
answer was, "yes". Somewhere in my mind I was thinking of a ring that was cut off with a ring cutter,
a tool used by jewelers. Ummmm I was WRONG!
The lady that owns this ring had her uncle cut it off. I am not sure what he used, but I am sure that it was not a jewelers ring cutter! Once I got over the initial shock, my heart jumped with joy! I knew I was going to restore this ring beautifully. I have known the owner since she was 5 years old. I have to make it right for her. I want her to enjoy it the rest of
her life! If you know me very well at all, you have heard me say, "Every diamond I own, I have earned!" This sweet mamma has 3 wonderful darlings, and somehow I feel like she has earned     every single diamond in this ring! I want it right for her!

When the owner of this ring brought it in, he thought that maybe the diamonds could be pulled and the metal melted down to make a new ring. I would have gladly done that for him, but I had to offer to restore it. All I could think of at the time was the hard work that the man had done for his family wearing this ring. It was honest, diligent hard work. You can see it on the ring. He wore the ring until it could not be worn any longer. That told me he loved the ring. I really hoped he would agree to let me restore it. I knew it could be done. I just hoped he would agree.......and he did! My heart soared with delight knowing that I would get to put a few good doses of TLC on this ring. He and his precious wife came into the shoppe this weekend to check on the status of the ring. They were very delighted with how it is looking!
 
I hope to complete both of these very very soon. When I do, I will post the restoration pictures.